Chockfast • Tenmat • MecLev • Anchor Bolts
✓ Competently ✓ Efficient ✓ Reliable
Close filters
 
  •  
  •  
  •  
No results were found for the filter!
Railko RG22
Railko RG22
TENMAT RAILKO RG22 is a synthetic fibre reinforced material with added friction modifiers. Fully approved as a rudder bearing material with all major marine classification societies, it contains special friction modifiers permitting its...
Price on request
Feroform PR18
Feroform PR18
TENMAT FEROFORM PR18 is a self lubricating composite material, made from synthetic woven fibres which are impregnated with resins and friction modifiers. It is an ideal bearing material for a wide range of bearing applications. These...
Price on request
Feroform T147
Feroform T147
TENMAT FEROFORM T147 has been developed for use in oil lubricated stern tube systems, but with the added advantage of also working with water lubrication in case of seal failure. It is a general purpose wearing and bearing material used...
Price on request
Railko JL31 - JL33
Railko JL31 - JL33
TENMAT RAILKO JL31 and JL33 are composite materials made from woven fibre bonded with resin with a friction modifier. RAILKO JL31 and JL33 are general purpose materials that give good wear life and low friction.
Price on request
Chockfast Gray 4.5 kg (4.2 liters)
Chockfast Gray 4.5 kg (4.2 liters)
Chockfast® Gray is a 2-component epoxy resin. It is preferably used for foundation of freestanding equipment such as e.g. Machine tools, crane rails, tanks, sluice gates, concrete anchors and installations on subframe constructions. The...
Price on request
Chockfast Black 8.6 kg (4.3 liters)
Chockfast Black 8.6 kg (4.3 liters)
Chockfast Black is a 2-component epoxy resin and is used as a molded fitting especially for machines with high temperature fluctuations, difficult environmental conditions (chemicals) and the necessary shock resistance. It is the...
Price on request
Chockfast Orange 3.4 kg (2 liters)
Chockfast Orange 3.4 kg (2 liters)
Chockfast Orange is a 2 component epoxy resin for casting e.g. marine engines. It is the advanced alternative to steel fittings for the correct alignment of equipment. Due to its very low shrinkage, machines and equipment remain in their...
Price on request
Chockfast Orange 6,8 kg (4 liters)
Chockfast Orange 6,8 kg (4 liters)
Chockfast Orange is a 2 component epoxy resin for casting e.g. marine engines. It is the advanced alternative to steel fittings for the correct alignment of equipment. Due to its very low shrinkage, machines and equipment remain in their...
Price on request
Viewed