Chockfast Orange is a 2 component epoxy resin for casting e.g. marine engines. It is the advanced alternative to steel fittings for the correct alignment of equipment. Due to its very low shrinkage, machines and equipment remain in their orientation constant after casting with Chockfast orange. It has a low viscosity and a very good adhesion to steel. Chockfast Orange fitting pieces are very heat-resistant (up to 90 ° C) and have a possible compressive strength of 133 N / mm². In addition, Chockfast Orange is resistant to corrosion, oils, fuels and many chemicals. In the marine sector, Chockfast Orange is the preferred potting material. It is approved by all classification societies and has been used in shipping for about 40 years. Other possible applications besides engines are e.g. Gear boxes, rudder bearings, stabilizers, cranes, flaps and gangways, stern tubes, masts, heli-landegrids, antennas, crane rails and many other components. Chockfast orange is suitable for layer thicknesses from 12 to 100 mm, with larger layer thicknesses it must be cast in several layers. The material is adjustable by adding hardener in the viscosity.